What's new

gonna by some wire for TC

greenbrucelee

Achiever
Joined
May 16, 2017
Messages
1,503
Going to get some ss316L wire and try and do my own coils for a change I generally do dual coil and prefer around 0.25 - 0.33ohms I'll have to get a jig to use. What gauage etc should I get?
 
Have also been looking at NiFe30 wire but not sure about what gauge etc I have found CSV files for it on steam engine but its only for dna200 will the file be ok on my 250 and 250c?
 
For MTL TC I use 28awg wire for SS and NiFe30. I don't bother with the csv files tbh. I use stealthvape for my NiFe30 and just use TCR of 500, works for me.
 
When I DTL it's generally on a mech, I've used TC on the topside dual and when I made that coil up it was a fused clapton ie 28awg core x2 with 38awg wrap SS
 
Back
Top Bottom