POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register

Help...pico squeeze 50w+mmaker dinky bottle

Discussion in 'Squonk!' started by Tilde, Oct 14, 2018.

  1. Tilde

    Tilde Postman

    Joined:
    Mar 22, 2017
    Messages:
    93
    Likes Received:
    31
    So I found a cheap pico squeeze 50w. Lovely little mod. Bottle is a bit shit so I found the correct dinky model from the mod maker site. Being a bit simple, even after watching the instructional video, I can't fit the bloody bottle. Do I need to remove the flat piece at the end of the squonk tube from the mod? Help please.

    Thank you.
     
  2. Joe 90

    Joe 90 Achiever

    Joined:
    Jan 10, 2016
    Messages:
    3,960
    Likes Received:
    1,774
    Hi @Tilde there is just a magnetic door at the bottom of the mod take that off and slide the bottle into place then put door back on
     
    • LOL LOL x 1
  3. Tilde

    Tilde Postman

    Joined:
    Mar 22, 2017
    Messages:
    93
    Likes Received:
    31
    I'm simple but not that simple.

    The squonk set up on the pico is a straight rod but with a washer on the base. It extends out with the fitted bottle when you need to replace eliquid. I reckon by removing the washer on the squonk rod the bottle will fit. Just need confirmation
     
  4. tony68

    tony68 Achiever

    Joined:
    Jul 9, 2016
    Messages:
    2,959
    Likes Received:
    2,888
    I dont think that we are getting the correct info can you post a pic to help us out
     
    • Like Like x 1
  5. Joe 90

    Joe 90 Achiever

    Joined:
    Jan 10, 2016
    Messages:
    3,960
    Likes Received:
    1,774
    As you slide the bottle out the washer comes down with the bottle you don’t take it off
    pull bottle off the washer and re fill up with juice
     
    • Like Like x 1
  6. BULLDOG1964

    BULLDOG1964 Veteran

    Joined:
    Aug 8, 2017
    Messages:
    5,938
    Likes Received:
    2,696
    The Wismec Luxotic BF silicon bottle fits the Pico squeeze you just need to take out the silicon ring that sit in the top in the pico not the silicon plug and dont fill the bottle right to the top as the magnetic door wont close there is a post on youtube about doing this hope that helps you a bit...
     
  7. Crewella

    Crewella Legend

    Joined:
    Aug 4, 2015
    Messages:
    11,164
    Likes Received:
    10,824
    This might help ...... even if you don't speak Italian ... ;)

     
    • Like Like x 2
  8. Tilde

    Tilde Postman

    Joined:
    Mar 22, 2017
    Messages:
    93
    Likes Received:
    31
    20181015_095827.jpg
     
  9. Tilde

    Tilde Postman

    Joined:
    Mar 22, 2017
    Messages:
    93
    Likes Received:
    31
    This is the actual setup from the pico
     
  10. Tilde

    Tilde Postman

    Joined:
    Mar 22, 2017
    Messages:
    93
    Likes Received:
    31

Share This Page