POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register

Ambition Mods C-Roll RDA

Discussion in 'Squonk!' started by Mawsley, Oct 11, 2018.

  1. Mawsley

    Mawsley Putting the soup into super hero

    Joined:
    May 14, 2013
    Messages:
    21,325
    Likes Received:
    11,026
    Grabbed this for about twenty-five quid from Vaping101 after a recommendation and watching Todd's video.

    Three word review: It's not shit

    JPEG image-D3AA4D73F9CA-4.jpeg

    Post holes are big enough to cram in a 30/26 gauge Clapton

    Deck easily accommodates the 3mm dia. coil

    Well is deep enough

    JPEG image-D3AA4D73F9CA-5.jpeg

    See the photo above? The airflow comes down - allowing the hole to be higher - and I've given it a sound squonking without any overflow

    You can also see the indentation under the airflow, on the base

    This fits the tabs inside the cap (see below) so the cap snaps on and doesn't rotate

    JPEG image-D3AA4D73F9CA-3.jpeg

    Below, the cap is two sections so you can close off the airflow

    I'm using the 2 holes wide open and it's producing just the kind of restricted lung draw I like

    JPEG image-D3AA4D73F9CA-2.jpeg

    Niggles? The drip tip is proprietary, so it doesn't take a 510 or 810

    After rummaging around in my big bag of spares, I found a fat o-ring to use on the Vaponaute tip and all is sweet

    JPEG image-D3AA4D73F9CA-1.jpeg

    All told, it's a nifty design producing a great restricted lung draw and top flavour for very few pennies

    Thumbs up
     
    • Like Like x 6
  2. tootingyoda

    tootingyoda Achiever

    Joined:
    Dec 4, 2015
    Messages:
    4,171
    Likes Received:
    5,463
    Cheers for the review mate, another one going in my basket.
     
    • Like Like x 1
  3. roccoweld

    roccoweld Postman

    Joined:
    Feb 18, 2014
    Messages:
    79
    Likes Received:
    44
    Jesus! From the pics, & that drip tip, it looks like an 16mm. Is that the brushed ss? Looks much smaller & nicer than I thought. Just ordered one from Sv vape. What wattage are you using?
     
  4. Mawsley

    Mawsley Putting the soup into super hero

    Joined:
    May 14, 2013
    Messages:
    21,325
    Likes Received:
    11,026
    It’s a satin more than brushed, and it’s about 35W on a .9ohm

    The tip is an 810 with a chunkier oring
     
  5. roccoweld

    roccoweld Postman

    Joined:
    Feb 18, 2014
    Messages:
    79
    Likes Received:
    44
    It's a long time since I've rocked satin but I'll find something to match
     

Share This Page