MightyMouth
Postman
- Joined
- Feb 26, 2013
- Messages
- 268
Hey all,
I am having trouble with temp control on my Smok Micro One 150. I initally tried it with the coils it came with but it kept cutting out and switching itself to Norm mode so I bought some 29 AG NiFE70 from VapeMesh and have wrapped 2 x .4 ohm coils (12 wraps each coil spaced about .5mm apart). Together they show .21 ohms on my coil master tester but the mod shows them as .30 ohms.
I have tried different wick thicknesses but generally very loose and they all do the same thing, I have the mod set to TC, 75W, TC-NI, 0.00500 ( I have tried many different TCR from .00400 to 0.00800), the wire has a TCR of 5000 which I think equates to 0.00500 on the mod but I am not sure as I am new to this. I really dont know what to do, I tried googling but came up short.
I am thinking of building a DNA75 mod as I am getting frustrated with this thing.
I am having trouble with temp control on my Smok Micro One 150. I initally tried it with the coils it came with but it kept cutting out and switching itself to Norm mode so I bought some 29 AG NiFE70 from VapeMesh and have wrapped 2 x .4 ohm coils (12 wraps each coil spaced about .5mm apart). Together they show .21 ohms on my coil master tester but the mod shows them as .30 ohms.
I have tried different wick thicknesses but generally very loose and they all do the same thing, I have the mod set to TC, 75W, TC-NI, 0.00500 ( I have tried many different TCR from .00400 to 0.00800), the wire has a TCR of 5000 which I think equates to 0.00500 on the mod but I am not sure as I am new to this. I really dont know what to do, I tried googling but came up short.
I am thinking of building a DNA75 mod as I am getting frustrated with this thing.
Last edited: