Single coils on dual coil decks???

[bobsyeruncle]

Any issues with doing this?
Specifically on decks that don't have plugs for the other side.
Would leaking be an issue?
Saw the vaping biker use a single coil on the wotofo conqueror and he raved about it.

 

[Simon G]

No real issues, although it will work better on some than others. You can put more cotton in with some to help fill the deck a bit.

 

[BULLDOG1964]

hi ive done this many times with a lot of my rdas and have never had any problems at all i say go for it and enjoy........

 

[BULLDOG1964]

hi ive done this many times with a lot of my rdas and have never had any problems at all i say go for it and enjoy........

also remember to put cotton on both sides of rda or you will get leaks.........

 

[bobsyeruncle]

Cheers guys, I'll give it a go and see how it goes.

 

[NorthEastVapeReviews]

Any issues with doing this?
Specifically on decks that don't have plugs for the other side.
Would leaking be an issue?
Saw the vaping biker use a single coil on the wotofo conqueror and he raved about it.

It depends on the device and the coil being used.
If you’re using a standard 5 wrap kanthal build it probably won’t work too well however if you use something like a big alien build a Clapton build or a hybrid coil etc it covers more surface area so the dual airflow will work with it. Some dual coil RDAs have airflow you can close off on one side for single coil mode but if yours doesn’t id day I’d mainly depends on the coil you use bro. Make sure it’s wicked correctly on both sides to avoid leaking and don’t over drip