Trungo
Achiever
- Joined
- Nov 13, 2013
- Messages
- 1,376
As it's that time of the month for buying supplies etc I thought I'd like to give ribbon wire a go, but not sure what size to get.
Ideally I'd like to end up with a coil around 0.5 - 1ohm range.
I use a 2 mm or 2.4 mm screwdriver to wrap my coils if that helps.
Sent with kind regards and salutations.
Ideally I'd like to end up with a coil around 0.5 - 1ohm range.
I use a 2 mm or 2.4 mm screwdriver to wrap my coils if that helps.
Sent with kind regards and salutations.