pg_rips
Initiate
- Joined
- Feb 16, 2020
- Messages
- 40
Just a heads up/learn from my fail when deep cleaning your Ethers! Small parts may fly out!
When taking the base apart to clean under the deck, BE CAREFUL. When you unscrew the 2 flat heads and the 510 the bottom plate comes off, which is fine. It’s when you remove the RFC ring which has a tiny spring pushing a tiny ball bearing against the ring for that oddly satisfying “clicking” effect. If you take this apart, make sure you’re taking it off slowly on a surface that’s smooth or aimed within a container of sorts. Don’t do what I did and yank it apart over a grey carpet. LOL
When taking the base apart to clean under the deck, BE CAREFUL. When you unscrew the 2 flat heads and the 510 the bottom plate comes off, which is fine. It’s when you remove the RFC ring which has a tiny spring pushing a tiny ball bearing against the ring for that oddly satisfying “clicking” effect. If you take this apart, make sure you’re taking it off slowly on a surface that’s smooth or aimed within a container of sorts. Don’t do what I did and yank it apart over a grey carpet. LOL