POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register

Hadaly RDA clone hot as s***

Discussion in 'Rebuildable Mods and Devices' started by Chu, Nov 6, 2018.

  1. Chu

    Chu Postman

    Joined:
    Aug 18, 2018
    Messages:
    495
    Likes Received:
    261
    Evening all!

    My Hadaly RDA clone arrived around a week ago but no matter what coil I put in it (I've tried various ones) it always seems to become hot as shit even on lower watts around the 40w mark.

    The flavour is top notch but the heat is savage. Any recommendations?
     
  2. gravystain

    gravystain Achiever

    Joined:
    Jun 21, 2015
    Messages:
    1,684
    Likes Received:
    1,598
    Get a Delrin or ultem top cap, heat transfer will be a lot less than the metal one...
     
    • Like Like x 1
  3. MrTeaTime

    MrTeaTime Legend

    Joined:
    Jul 14, 2013
    Messages:
    14,490
    Likes Received:
    11,224
    I'd see a doctor. From what I can gather and this is purely from what I've read you understand, I have no personal experience of testing this....... but from Wikipedia, shit should be at body temp.

    This leaves us one if two things.....

    You either have no tolerance for temps no higher then 37.5c and have sensitive lips, or you are quite ill if your shit is like really really hot.....
     
    • LOL LOL x 4
    • Like Like x 1
  4. Chu

    Chu Postman

    Joined:
    Aug 18, 2018
    Messages:
    495
    Likes Received:
    261
    I actually have one on my eBay watch list I was looking at buying. will it make that much of a difference will it?
     
  5. Simon G

    Simon G Legend

    Joined:
    Apr 12, 2016
    Messages:
    17,976
    Likes Received:
    17,203
    I think 40w is quite a lot in an atty like that.

    what's the resistance? I would go for a 0.7 or something around 25-30w.... it doesn't have enough airflow to cool it down for much more power I would say.
     
    • Like Like x 1
  6. Rickster

    Rickster Achiever

    Joined:
    Oct 31, 2014
    Messages:
    4,973
    Likes Received:
    3,303
    Yes, I have 2 originals, coiled at 0.4ish used on a mech squonker....with either the delrin or preferred ultem tip, little to no heat transfer
     
  7. gravystain

    gravystain Achiever

    Joined:
    Jun 21, 2015
    Messages:
    1,684
    Likes Received:
    1,598
    For sure it will, Delrin or ultem is much more resistance to heat than metal, it will be like a different rda with one on...
     
  8. domejunky

    domejunky Moderator Staff Member

    Joined:
    Nov 17, 2015
    Messages:
    2,410
    Likes Received:
    1,538
    I'm the same one of my most used RDAs - 0.5-0.6 - 22.5 - 25watts
     
    • Like Like x 1
  9. Chu

    Chu Postman

    Joined:
    Aug 18, 2018
    Messages:
    495
    Likes Received:
    261
    Well the best way I can describe is, After eating that lovely Vindaloo down the local curry house and a few hours later/next day you go to empty your bowls and it feels like your giving birth to Satan himself from your arsehole. It kind of like that but on your lips instead :18:

    Currently tried various builds ranging between .22 to .33 as that what was recommend from what I watched/read and at that recommended wattage.


    Loverly job, I'll order it soon. Thanks :)

    I'll give that a try later. Thanks.
     
    • Like Like x 1
  10. eyeball kid

    eyeball kid Legend

    Joined:
    Mar 21, 2016
    Messages:
    14,058
    Likes Received:
    14,559
    Yeah I made sure I had the pei topcap on the second one I bought. (Threw the first one away by accident, yes really... it was genuine too.)
    It's probably worth buying an ft clone with one included and using that as it's dead cheap.
     
    • Thank Thank x 1

Share This Page