POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register
  1. The POTV Charity Fundraising Event for 2019 is go! Check out the prizes and make your donations here.
    Dismiss Notice

[Guide] How to build your Fogger v4

Discussion in 'Rebuildable Mods and Devices' started by BAVapes, Jul 6, 2014.

  1. TheLeebs

    TheLeebs Initiate

    Joined:
    Mar 26, 2014
    Messages:
    34
    Likes Received:
    3
    I love my Fogger and it vapes beautifully but for some reason it leaks out of the drip tip when I fill it and then when you turn it the right way round the juice that was coming out of the top leaks out of the airflow. 5 or 6 puffs clears it through and it stops leaking, until I fill it again. Any suggestions to stop this would be awesome.
     
  2. BAVapes

    BAVapes Vendor

    Joined:
    Apr 27, 2014
    Messages:
    854
    Likes Received:
    146
    It's very likely that you have shredded the o'ring at the top of the chimney that screws into the top cap, you should have 2 or 3 spares in your little spares bag. Do not over tighten the top cap, or you will shred your new o'ring as soon as you put it on.

    I should start a Fogger wiki or something! haha
     
    • Like Like x 1
  3. Lockett

    Lockett Postman

    Joined:
    Jan 25, 2014
    Messages:
    574
    Likes Received:
    91
    That's a beautiful build. :)
     
    • Thank Thank x 1
  4. TheLeebs

    TheLeebs Initiate

    Joined:
    Mar 26, 2014
    Messages:
    34
    Likes Received:
    3
    Thanks for that, it worked a treat:grin2:
     
    • Like Like x 1
  5. BAVapes

    BAVapes Vendor

    Joined:
    Apr 27, 2014
    Messages:
    854
    Likes Received:
    146
    Thanks @Lockett85 I thought the coils turned out pretty nicely too!

    @TheLeebs no problem mate! I have taken apart and rebuilt so many Fogger v4s by this point I pretty much know them inside and out! Be careful not to over tighten the top cap, or you will shred that o'ring again! I've been through quite a few of them myself. You want to tighten it so that it so that there's a good amount of resistance but not so much that you can not turn it any more.
     
    #15 BAVapes, Jul 7, 2014
    Last edited: Jul 7, 2014
  6. blademansw

    blademansw Achiever

    Joined:
    Apr 3, 2014
    Messages:
    4,448
    Likes Received:
    1,156
    Also make sure you put some juice on the ring, it makes the tip slide in easier.
     
  7. BAVapes

    BAVapes Vendor

    Joined:
    Apr 27, 2014
    Messages:
    854
    Likes Received:
    146
    Is that what she said?
     
  8. blademansw

    blademansw Achiever

    Joined:
    Apr 3, 2014
    Messages:
    4,448
    Likes Received:
    1,156
    Hahaha I was wondering when someone was going to spot that :-)

    Sent from my GT-N7100 using Planet of the Vapes mobile app
     
  9. BAVapes

    BAVapes Vendor

    Joined:
    Apr 27, 2014
    Messages:
    854
    Likes Received:
    146
    It wasn't exactly subtle!
     
  10. blademansw

    blademansw Achiever

    Joined:
    Apr 3, 2014
    Messages:
    4,448
    Likes Received:
    1,156
    That's my middle name. Not

    Sent from my couch using the internetz....
     

Share This Page