POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register
  1. The POTV Charity Fundraising Event for 2019 is go! Check out the prizes and make your donations here.
    Dismiss Notice

Derringer RDA

Discussion in 'Rebuildable Mods and Devices' started by StuPot, Jan 9, 2015.

  1. richard_uk

    richard_uk Postman

    Joined:
    Jan 19, 2015
    Messages:
    275
    Likes Received:
    62
    I'll be taking the Xpro with me anyway so will try it on that, tbh I'll know straight away when I look at it anyway, the thread on this is the same as the thread on my Atlantis & Subtank, it's the insulator and screw that are sticking out too far.
     
  2. richard_uk

    richard_uk Postman

    Joined:
    Jan 19, 2015
    Messages:
    275
    Likes Received:
    62
    As I said I'm not going to risk messing with it, if it was a cheapy from China I'd have had it in bits by now, but it's from a shop a couple of miles away, I don't have much patience but I can handle waiting until tomorrow, just about :)
     
  3. Blackhack

    Blackhack Achiever

    Joined:
    Nov 7, 2013
    Messages:
    3,929
    Likes Received:
    1,312
    This is my personal review of the Cloned Derringer RDA
    First off, this has to be the smallest RDA I've ever had, it's tiny, but still manages to have reasonably deep juice wells
    It can be used as either single or dual coil and plenty of room to build on if you're like me and have poor eyesight.
    Airflow can be adjusted with three settings for both twin and single coils
    It's currently twin coiled @ 0.4 Ohms and blasting out that much vapour the my Mrs has left the room muttering about smog..

    It has all the correct markings for those strange people who want to pretend it's a genuine, To be honest I cant see the original being that much better than this clone...It just works, and works really well
    It doesn't (So far) seen to have the leaking out of the airholes problem that some drippers have


    Here's the tech stuff...

    Stainless steel 510 drip tip
    Air flow adjustable, with AFC
    Triple posts design
    Posts material: Stainless steel
    510 threading connection
    Fixed SS 510 center screw
    22mm diameter
    Height without drip tip: 22.5mm
    grub screws in the poles
    Comes in a small plastic case with some Japanese cotton, Allan key, spare grub screws, some wire for making coils, and a spare set of o'rings

    And did I mention that it's really, really tiny ??
    Here's a look at one in relation to a 10ml juice bottle

    [​IMG][/URL][/IMG]


    [​IMG][/URL][/IMG]


    Cracking little dripper......10/10 for this little gem
     
    • Like Like x 1
    • Thank Thank x 1
  4. richard_uk

    richard_uk Postman

    Joined:
    Jan 19, 2015
    Messages:
    275
    Likes Received:
    62
    Well I took mine back today, he tried screwing in the pin but obviously it didn't move, so he chucked me a new one, which was fine. He then took apart the one I'd returned, apparently whoever put it together had put the insulator in backwards, he sorted it while I was still there but I kept the new one, didn't really want the one that been messed with. On to YouTube now to watch some coil tutorials, will maybe pop back later with a pic of my first build, for you all to have a laugh at :). I'm going for (on the shop guys advice) a twin coil, 10 wraps, with 28 gauge kanthal.
     
  5. richard_uk

    richard_uk Postman

    Joined:
    Jan 19, 2015
    Messages:
    275
    Likes Received:
    62
    Finally! It was meant to be .5 OHM but the M50 says its .7 so not sure what went wrong there, but they appear to lighting up properly.
     

    Attached Files:

  6. gary68

    gary68 Veteran

    Joined:
    Jan 21, 2013
    Messages:
    6,783
    Likes Received:
    2,332
    Glad you got yourself sorted fella e njoy the wee derringer its a cracking little thing ...I'm waiting patiently for an LPG clone ....it gonna make a lovely little stealth setup
     
  7. richard_uk

    richard_uk Postman

    Joined:
    Jan 19, 2015
    Messages:
    275
    Likes Received:
    62
    Wicked it, juiced it, 30w on the M50, tons of flavour, and reasonable clouds :)
     
  8. Huggett

    Huggett Legend

    Joined:
    Feb 25, 2014
    Messages:
    14,202
    Likes Received:
    8,302
    ImageUploadedByPlanet of the Vapes1424210204.090380.jpg

    Derringer single coil @ 20watts think I need to rethink my 'stealth set up'


    Sent from my iPhone using Planet of the Vapes
     
  9. Huggett

    Huggett Legend

    Joined:
    Feb 25, 2014
    Messages:
    14,202
    Likes Received:
    8,302
    So then...

    Who's awaiting the Derringer v2?

    ImageUploadedByPlanet of the Vapes1424210303.161695.jpg

    Photo came via Sir Rags


    Sent from my iPhone using Planet of the Vapes
     
  10. gary68

    gary68 Veteran

    Joined:
    Jan 21, 2013
    Messages:
    6,783
    Likes Received:
    2,332
    Close the air down a bit .for a warmer Vape and a nice long slow drag for clouds matey ;)
     
    • Thank Thank x 1

Share This Page