Phantom Diablo
Achiever
- Joined
- Sep 16, 2013
- Messages
- 3,087
thought i would give this a try in my RSST as i dont have any other atty to play around with cotton wicks
so basically its a length of rolled cotton wool ( like you would do for any micro coil etc)
soak the cotton in some juice then roll your SS mesh around it > i used my existing mesh . just unravelled it as its well oxidised too so helps gave its a little trim so it wouldnt be stupidly tight then rolled it around the length of soaked cotton ( a little messy ). stuck it in rsst, popped on a 4 wrap coil ( 1.8 ohms. checked for hot spots and to ensure cotton didnt burn, filled her up and all good. draw is actually a little warmer and seems to be more flavour too,
def worth a try if your getting some harsh cape on an RSST with mesh
so basically its a length of rolled cotton wool ( like you would do for any micro coil etc)
soak the cotton in some juice then roll your SS mesh around it > i used my existing mesh . just unravelled it as its well oxidised too so helps gave its a little trim so it wouldnt be stupidly tight then rolled it around the length of soaked cotton ( a little messy ). stuck it in rsst, popped on a 4 wrap coil ( 1.8 ohms. checked for hot spots and to ensure cotton didnt burn, filled her up and all good. draw is actually a little warmer and seems to be more flavour too,
def worth a try if your getting some harsh cape on an RSST with mesh
