POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register
  1. The POTV Charity Fundraising Event for 2019 is go! Check out the prizes and make your donations here.
    Dismiss Notice

Anyone with an Aromamizer ?

Discussion in 'Rebuildable Mods and Devices' started by mick brown, Aug 27, 2016.

  1. mick brown

    mick brown Achiever

    Joined:
    Apr 30, 2016
    Messages:
    4,499
    Likes Received:
    3,324
    So you did
    What sort of wattage we looking at ?
     
  2. mick brown

    mick brown Achiever

    Joined:
    Apr 30, 2016
    Messages:
    4,499
    Likes Received:
    3,324
    Very kind
     
    • Like Like x 1
  3. mick brown

    mick brown Achiever

    Joined:
    Apr 30, 2016
    Messages:
    4,499
    Likes Received:
    3,324
    Well, I couldn't wait till the weekend so got home and set to work.
    As @Mr Numpty suggested I've put two 28gauge coils in and it's come to 0.82 ohms. Running 27.5 watts through it with two air holes and flavour has improved drastically. This pfvapes Karma Frappe is lovely :)
    Anyway, is that enough power or will more give me even better flavour. I'm reluctant to ramp it up too much and burn my coil and wick out :hmm:
     
    • Like Like x 3
  4. Mr Numpty

    Mr Numpty Veteran

    Joined:
    Jun 9, 2015
    Messages:
    6,379
    Likes Received:
    5,077
    Nice one, glad you're having a bit more success with it. No real idea about what specific wattage you can go to as I'm one of those weird TC vapers where wattage means very little. Pretty sure it's just a case of increasing to where you like the vape you're getting. It may come to a point where the vape is too hot or your wicking doesn't keep up, at which point you have discovered the limits of that particular set up.
     
    • Like Like x 1
  5. Mr Numpty

    Mr Numpty Veteran

    Joined:
    Jun 9, 2015
    Messages:
    6,379
    Likes Received:
    5,077
    Have you tried TC vaping yet, Mick? I ask because a 2.5mm ID, dual horizontal, 8 wrap 29 gauge NiFe30 build in this is absolutely glorious and from reading your preferences, I believe it would be right up your street. The vape is so smooth and stable, the taste so clean and, by varying the temp setting, can be tailored to your heart's desire. I rotate through the various TC wires at each coil change and today saw the return of the above set up. As I started to vape it, I immediately thought of you (so here I am :D). It's a truly sublime vape on the Aromamizer.
    TC coiling and wicking does take a little bit of relearning from wattage mode builds, but the rewards are well worth it. I'd be happy to send you some NiFe30 if you'd like to give it a whirl.
     
  6. mick brown

    mick brown Achiever

    Joined:
    Apr 30, 2016
    Messages:
    4,499
    Likes Received:
    3,324
    @Mr Numpty . I haven't ventured down the tc route yet but I dare say it'll happen one day.
    I'm slowly preparing for it by getting mods that have TC mode. I have an RX200 at the moment and have a very flashy Vapedroid DNA 75watt on the way from Gearbest, I just couldn't resist it, was a great price.:D DNA !!!!! What have I done :grin2: Also my old istick 20 that I use for work is becoming very dodge 510 thread wise so had another weak moment of shinyitus and ordered an iPower 80 watt to replace it and more.;)
     
    • Like Like x 1
  7. Mr Numpty

    Mr Numpty Veteran

    Joined:
    Jun 9, 2015
    Messages:
    6,379
    Likes Received:
    5,077
    Ooh, Vapedroid DNA75, NiFe30 and RDTA, a match made in heaven. ;) PM me you address anytime if you'd like the wire, it would be my pleasure.
     
    • Thank Thank x 1
  8. Vaped Crusader

    Vaped Crusader Achiever

    Joined:
    Apr 15, 2013
    Messages:
    2,033
    Likes Received:
    1,049
    I'm suddenly finding that my coils (approx 0.4ohms) are going haywire. Out of the blue the resistance changes to anywhere between 2.5 down to 0.7ohms.

    I've tried it one different mods and they all give the same reading so I know its the tank. I've fiddled with the centre screw underneath, tightenin g it did no good, lossening it a bit seemed to have brought it back down to earth and what it should be. Hopefully that's done the trick, if not, anyone have an idea what this could be?
     
  9. tootingyoda

    tootingyoda Achiever

    Joined:
    Dec 4, 2015
    Messages:
    4,795
    Likes Received:
    6,638
    Are the screws securing the wire all tight? Has a wire snapped? Is any wire touching the chamber walls?
     
  10. Vaped Crusader

    Vaped Crusader Achiever

    Joined:
    Apr 15, 2013
    Messages:
    2,033
    Likes Received:
    1,049
    Yes no and no. The coil is less than a day old and it's happened on more than one tank which is why I originally thought the mod was throwing up bad resistances. Still behaving after loosening the centre screw though so i'm hopeful it was that. thank you for the inpout though, those were things I didn;t think of checking.
     

Share This Page