POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register

Anyone with an Aromamizer ?

Discussion in 'Rebuildable Mods and Devices' started by mick brown, Aug 27, 2016.

  1. mick brown

    mick brown Achiever

    Joined:
    Apr 30, 2016
    Messages:
    4,603
    Likes Received:
    3,473
    Is that the air flow ring you mean, difficult to turn ?
     
  2. beastobadness

    beastobadness Achiever

    Joined:
    Jul 21, 2015
    Messages:
    1,668
    Likes Received:
    1,048
    Take a look at this VapingWithVic vid, he gives plenty of info on the Merlin...
     
    • Thank Thank x 1
  3. mick brown

    mick brown Achiever

    Joined:
    Apr 30, 2016
    Messages:
    4,603
    Likes Received:
    3,473
    • Like Like x 1
  4. Rob

    Rob Administrator Staff Member

    Joined:
    Aug 18, 2013
    Messages:
    19,001
    Likes Received:
    22,531
    This makes an especially interesting read for me because I am ashamed to say........... I have yet to do anything more brave than look at my Supreme sitting in its box:S
    I had been contemplating "having a go" but somehow, never quite built up the courage. I am always very aware that my Old School approach, i.e MTL or Restricted MTL won't necessarily suit today's clever designs. I just might get a bit more courageous later today.:51:
     
    • Like Like x 2
  5. spookypubes

    spookypubes Postman

    Joined:
    Feb 26, 2015
    Messages:
    52
    Likes Received:
    8
    i haven't read the whole thread, so apologies if this has been mentioned before. Have you tried building vertical coils on the aromomizer? on the V1 just make sure the airholes are hitting the coils directly. Flavour for days, they are some of my favourite tanks
     
  6. mick brown

    mick brown Achiever

    Joined:
    Apr 30, 2016
    Messages:
    4,603
    Likes Received:
    3,473
    I've got two vertical coils in series now. Separate twin coils , parallel ! , won't work for me as it drops the ohms to much.
     
  7. feralvape

    feralvape Member

    Joined:
    Jul 7, 2016
    Messages:
    7
    Likes Received:
    1
    I think the newer Aromamizer is more conducive to a horizontal build. The first ones had holes in the side while the newer ones big horizontal slots. If you follow the video reviews you see them make the transition from vertical to horizontal builds. Done in that fashion you can easily see the coil lined up with the air follow slots and just behind them. So you got air being pulled in directly on the coils.
     
    • Like Like x 1
  8. scrumpox

    scrumpox Veteran

    Joined:
    Jul 11, 2014
    Messages:
    7,128
    Likes Received:
    5,492
    No offence Mick but your building skills need a bit of work ... the RDTA v1 and v2 are flavour machines but your reluctance to put any power through it, sticking to the way you prefer to vape, isn't going to make that atty shine. Horses for courses. You would do a lot better with the single coil plug, reducing the airflow and chamber size down to suit your prefered style. Otherwise, the RDTA is just not the tank for you.
    You're getting a lot of condensation because it will wick for days and you're not putting enough heat into the coils or airflow over them, so it's just boiling off some of the juice on sodden wicks. I'll bet if you fire it outside the tank it'll spit drops of juice all over the place instead of making loads of vapour.
    I'd like to put a flavour build on your deck for you but honestly, you're going to need to put 40-60W through it and max out the airflow. Not your style really.
    If you want reduced airflow then you have to reduce the coil size to match. Passing a trickle of air over 3.0mm ID coils just won't work. I also think you need to break through this glass ceiling objection that you have about build resistances below 1ohm. Dropping down to 0.5-0.8 ohm is hardly entering the gates of hell.
    Rob, you and the Supreme are not a match made in heaven. The Supreme is like the RDTA on steroids ... it really sings with big assed coils and huge airflow. Move it on would be my advice.
     
    • Like Like x 1
    • Thank Thank x 1
  9. Rob

    Rob Administrator Staff Member

    Joined:
    Aug 18, 2013
    Messages:
    19,001
    Likes Received:
    22,531
    @scrumpox I was considering entering in The Raffle? Sort of Paying It Forward? What do you think?
     
  10. scrumpox

    scrumpox Veteran

    Joined:
    Jul 11, 2014
    Messages:
    7,128
    Likes Received:
    5,492
    That's the kinda guy you are Rob. :) When's the raffle open for ticket sales? I've not put any old gear in as I've already moved on just about everything I'm not using, but I want to buy a few tickets to make my contribution.
     
    • Thank Thank x 1

Share This Page