What's new

All gone wrong help freak show mini

Tbh without being rude its prob best to tug it and have another crack, if you get the one in there sorted the next pain in the bum will be wicking it.

The coil itself looks tidy BTW.
 
Resistence is going up when firing

Looking at the image (last image you posted) there that's normal, you need to keep pulsing and giving the coil a squeeze together with tweezers until it glows even. You can even rub the coil lightly across the top a few times with a screwdriver (or something metal) and then pulse, it will eventually glow from the middle outwards with no hotspots. Hopefully your resistance will settle then providing, as has been discussed, it's not shorting out anywhere. (Don't squeeze or rub the coil when your firing the mod though unless you have ceramic tweezers).
 
Looking at the image (last image you posted) there that's normal, you need to keep pulsing and giving the coil a squeeze together with tweezers until it glows even. You can even rub the coil lightly across the top a few times with a screwdriver (or something metal) and then pulse, it will eventually glow from the middle outwards with no hotspots. Hopefully your resistance will settle then providing, as has been discussed, it's not shorting out anywhere. (Don't squeeze or rub the coil when your firing the mod though unless you have ceramic tweezers).
Thanks for the great advise im slowley getting there xx
 
Right I finally got a nice glow everything looking nice and neat but resistance is at 3.4 is this to high to vape at?any ideas on how to lower it
 
If the the coil is 1 ohm then it should read around 1 ohm. The only thing I can think of is a short. Make sure the screws are tight and the coil isn't touching the deck. You said they were pre made coils, where did you get them from?
 
Back
Top Bottom