Help

[FreeMind94]

Im new to vaping im wanting the smok thallo s with 20mg nic salts what coils and rpm or rpm 2 do i need and can i have a separate rpm with a different coil set up for just regular mtl shortfills 70/30 ?

 

[ForestMagpie]

The MTL coil for the thallo is the RPM2 0.6ohm coil, it will come with one in the kit.

 

[FreeMind94]

The MTL coil for the thallo is the RPM2 0.6ohm coil, it will come with one in the kit.

Some sites are saying coil has to be more than 1.0

 

[ForestMagpie]

Some sites are saying coil has to be more than 1.0

That's an outdated and simplistic way of looking at it and doesn't apply. MTL coils don't have to be above 1ohm these days at all. I use 0.65, 0.74 and 0.8 coils all for MTL.

 

[Crispycritters]

Some sites are saying coil has to be more than 1.0

I think that's a generalisation from the days when all coils were made of roundwire. With mesh the 1 ohm minimum rule doesn't really apply.

 

[FreeMind94]

That's an outdated and simplistic way of looking at it and doesn't apply. MTL coils don't have to be above 1ohm these days at all. I use 0.65, 0.74 and 0.8 coils all for MTL.

So i just add a 20mg nic shot to the coil that comes with it ?

 

[Crispycritters]

So i just add a 20mg nic shot to the coil that comes with it ?

It should be fine with Nic Salts. I'd leave it to sit for 5 to 10 minutes for the cotton in the coil to soak up some juice after filling before vaping, but once the coil is primed you should be good to go.

 

[ForestMagpie]

So i just add a 20mg nic shot to the coil that comes with it ?

It'll come with 2 coils, the 0.6ohm and a 0.16ohm coil, make sure you install the 0.6. it'll be written on the coil which one it is.

 

[FreeMind94]

It'll come with 2 coils, the 0.6ohm and a 0.16ohm coil, make sure you install the 0.6. it'll be written on the coil which one it is.

Thanks alot