Haar 2020 rta

[tanglewood]

WITH US BEFORE THE END OF JUNE

The HAAR RTA is a collaboration between Van & Del Design and Todd’s Reviews.

The name for the RTA comes from a sea fog that occurs on the East Coast of Scotland and the logo that is engraved in the tank and AFC is a frequently used symbol representing a Haar.

Features

Top filling
Liquid control
Adjustable Air flow DL-MTL
High heat resistance materials
Build deck is accessible without a need to empty the tank
DL and MTL drip tip included
Allen Key, spare O rings and grub screws included.

Materials

Main: Stainless Steel AISI 316L
O-rings: Viton
Insulators: Ketron Peek
Top Fill Seal: Black silicone Food Grade
Tank & Drip Tip: PC1000

Specifications

Height: 40mm
Diameter: 22mm
Liquid Volume: 4ml
Fill method: Top fill
Air Flow: Dual sided
Airhole Sizes (selectable): 1 x 1.6mm/1 x 4mm/1 x 1.2mm
Large Drip tip: Inner bore 6mm – Height 7.6mm
MTL Drip tip: Inner bore 3.5mm – Height 9.6mm
Deck depth: 5.7mm
Grub Screws: |
510: SS M3.0 Thread
O ring AFC Section: 2 x 18*16*1
O Ring tank Section: 2 x 20*18*1
O Ring lower top section: 1 x 8*6*1
O Ring upper top section: 1 x 9*7*1
O Ring Drip tips: 2 x 8*6*1
Top Cap insert: 2.0mm Silicone
Manufactured in Hong Kong

 

[scottish-jim]

I like the sound of that Interesting knowing that that Todd is involved.

 

[rew]

@tony68 mentioned this a few days ago. Think you can pre order from Steam Island now.
Wonder if it does proper MTL?

 

[scottish-jim]

@rew Todd says it's not a proper MTL in his video and it's a restricted DTL

 

[rew]

@rew Todd says it's not a proper MTL in his video and it's a restricted DTL

Ok. That's fair enough. Cheers.

 

[gardenvalley]

The mouthpiece is far too short and there`s a small plastic window half way up the tank section. No thanks.

 

[rew]

Looks a bit like an Eden Mods Rose 3 to me.

 

[tanglewood]

Think I will wait for reviews to pop up.

 

[todd]

@rew Todd says it's not a proper MTL in his video and it's a restricted DTL

Not quite what I said , it is MTL but it is not "proper" as in a 0.8mm type draw

The mouthpiece is far too short and there`s a small plastic window half way up the tank section. No thanks.

Which mouth piece do you consider short? and the PC1000 tank is actually at the bottom of the tank, not the middle.

Facts I can help you with, opinions are your own and you are entitled to them 100%

 

[scottish-jim]

Not quite what I said , it is MTL but it is not "proper" as in a 0.8mm type draw

OK sorry Todd - I only quoted what you said in the video at 17:44: "It is not what I would consider to be - proper mouth to lung - it's not, it's not" which was in response to the question by rew. I was trying to be helpful in my clumsy way.

Sorry if I misunderstood