What's new

Favorite Build?

28AWG kanthal, 2.5mm ID, 7/8 wraps, contact coil, to around 1.4, 10-11 watts and wicked with muji, scottish rolled.
 
28AWG kanthal, 2.5mm ID, 7/8 wraps, contact coil, to around 1.4, 10-11 watts and wicked with muji, scottish rolled.
Same as this atm.
Sometimes splash the boat out and go 9 wraps of 27g ss316l 2.5mm I'd around 0.85ohms 15-16w
 
Depends on the tank

Prime as it has a wide air whole I do 6 spaced wraps 26awg kanthal.

Kayfun lite 7 wraps ni80 contact coil.
 
26g round wire Kanthal, 2.5mm 7 or 8 wraps for about 0.80 ohms, vape it at 15w or Ni80 MTL fused clapton for about 0.70-.80 ohm at 15 watts
 
I thought it was a given that MTL Coils are 2.5 id, it's the size i have always used, think i mainly use 2.5 for DTL Coils as well though i have a load of Wotofo 3.0 id NI80 Coils to use up.
 
for little mtl rta's
ID: 2 mm - 6 wraps
Wire: 0.23mm KA1 - crazy wire
Cotton: BP mods pro vape cotton
power: 8 watt

for tall mtl rta's
ID: 2.5 mm - 5 wraps
Wire: 0.27mm KA1 - crazy wire
Cotton: BP mods pro vape cotton
power: 9.5 watt

sometimes TC
ID: 2.5 mm - 6 wraps
Wire: 28 awg titanium or nife70, rarely 27 awg SS430
Cotton: BP mods pro vape cotton
power: 215-230C

eda37977-3fc8-4621-a8c9-6ac9934fa68a.jpg
 
Back
Top Bottom