What's new

Don't laugh but...

You do realise this is related to low power mtl.
No, I didn't mean he should start whacking in 20g 0.12 ohm builds!!
I was merely saying, wrapping nice tight coils, that aren't so springy, is easier with thicker gauge wire.
That one I posted up is coming out at 1.5 ohms, 13 wraps, 22 watts!!!!!(
 
No, I didn't mean he should start whacking in 20g 0.12 ohm builds!!
I was merely saying, wrapping nice tight coils, that aren't so springy, is easier with thicker gauge wire.
That one I posted up is coming out at 1.5 ohms, 13 wraps, 22 watts!!!!!(
Try 8 wraps of 27g kanthal.
A lot less wire for the same vape and will use around half the power.
 
Try 8 wraps of 27g kanthal.
A lot less wire for the same vape and will use around half the power.
I seem to be getting all the advice here, and I don't even use MTL devices? It's not my thread.
I was only trying to help @Astral with his wobbly coils.
He's doing just fine, I think I'll go now!! :ape1:
 
That’s far better than my first efforts @Astral! I had bits of wire pinging off disappearing behind the radiator and all sorts when I first started out :8:
 
Back
Top Bottom