POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register

coppervape dvarw mtl

Discussion in 'Mouth to Lung Vaping' started by triballofts, Aug 13, 2018.

  1. triballofts

    triballofts Postman

    Joined:
    Jul 11, 2012
    Messages:
    618
    Likes Received:
    86
    hi i have a coppervape dvarw mtl and no matter how it coil and wick it carn't seem to get any flavor out of it i use kanger subtank minis with rba decks and they seem to be far better in flavor ive tried 2mm 2.5mm coils at any where from 0.5 to 1.3 ohms 28g 26g and even 28g twisted but still no joy raised coil up lowered it down dont get any dry hits or leaking at all very muted any one else getting this or is it just me
     
  2. Simmo961

    Simmo961 Postman

    Joined:
    Dec 6, 2015
    Messages:
    280
    Likes Received:
    298
    I am following this with interest as I have one on the slow boat from China.
     
    • Like Like x 1
  3. pancser

    pancser Postman

    Joined:
    Sep 29, 2016
    Messages:
    631
    Likes Received:
    315
    No you are not the only one @triballofts
    I had the same experience at the beginning but after the first or second tank of juice the flavour came to life and it is still there since then
    I belive all this because of the plastic tank if I am wrong please someone correct me
    Just have a quick wash and give it a try again
    It is a great Rta IMO ;)
     
    • Like Like x 2
  4. triballofts

    triballofts Postman

    Joined:
    Jul 11, 2012
    Messages:
    618
    Likes Received:
    86
    thanks for that but im using the ss tank section tried both melted one plastic tank so have not used another one since the subtank pissis all over the dvarw so far ive had it for about a 6 weeks now like a fool i bought 3 of them also tried all the air in certs did not make any difference so stuck with the 2mm one
     
  5. pancser

    pancser Postman

    Joined:
    Sep 29, 2016
    Messages:
    631
    Likes Received:
    315
    Have you considered to try the oval holed chimney section?
    https://www.fasttech.com/p/9646333
    Do you do MTL? because the 2mm insert is way to airy for that (even the stock 1.2mm insert was a bit airy for me)
    What is your juice Vg/Pg ratio?
    ovalvsstock.jpg
     
  6. triballofts

    triballofts Postman

    Joined:
    Jul 11, 2012
    Messages:
    618
    Likes Received:
    86
    i can see where your coming from but seems plenty of juice getting through but just flavor seems muted the subtank has bigger air flow but thats great maybe it ant for me ????
     
  7. pancser

    pancser Postman

    Joined:
    Sep 29, 2016
    Messages:
    631
    Likes Received:
    315
    I have a Subtank for sale :14:
    I can swap it for one of your Coppervape Dvarw if you interested
     
  8. triballofts

    triballofts Postman

    Joined:
    Jul 11, 2012
    Messages:
    618
    Likes Received:
    86
    thanks for the offer but ive got 6 subtanks at the moment
     
  9. pancser

    pancser Postman

    Joined:
    Sep 29, 2016
    Messages:
    631
    Likes Received:
    315
    No probs
    I had to try ;)
     
  10. zouzounaki

    zouzounaki Legend

    Joined:
    Dec 13, 2016
    Messages:
    19,495
    Likes Received:
    10,184
    @triballofts how are you positioning your coil, and how much cotton are you using? I find the coil needs to be as low as you can get it for flavour, with the coil on the screwdriver/rod or whatever, screw the legs down while holding it hard against the little rim (oo-er!). Too high and flavour drops off and throat hit increases, I find. And I go very light on the cotton. Just reaching across between the two holes with a tiny bit poking through. No fanning it out or s shapes for me.

    I’m experimenting with the oval liquid hole collar at the minute, don’t really notice any difference at all to be honest.
     
    • LOL LOL x 1

Share This Page