POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register

The NextGen and The Nextiny

Discussion in 'All Things Mesh and Genesis' started by sparkyjuice, Oct 27, 2015.

  1. Rob

    Rob Administrator Staff Member

    Joined:
    Aug 18, 2013
    Messages:
    18,341
    Likes Received:
    21,207
    Excellent, I always have raised the wick on all of the Nexts I have had, so no problems there either.
    Roght, I'll crack on with a build in a minute and see what I can do.:2thumbsup:
     
    • Like Like x 1
  2. Rickster

    Rickster Achiever

    Joined:
    Oct 31, 2014
    Messages:
    4,255
    Likes Received:
    2,653
    Current build in as recommended by @jjde 200sf mesh (40mm) over a core of 500 mesh (30mm)
    Ni200 .30, 7 wraps reading 0.12ish....430f...hitting 20w at the mo:)

    Edit: going to try #400 next time
     
    #102 Rickster, Apr 7, 2016
    Last edited: Apr 7, 2016
    • Like Like x 2
  3. SimonSq

    SimonSq Postman

    Joined:
    Oct 27, 2015
    Messages:
    202
    Likes Received:
    170
    Both my Nexgen & Nextiny are wicked with 300 grade mesh, with a topper of the same grade (tight arse that i am) all cut from the same piece ! wicks my home made juice 70/30 fine and i have had very little trouble with my coils. if i leave it sat for a while i need a primer 'pull' but other than that i am super impressed. (both clones..see above:))

    lovely to have a dedicated spot for help and advice
     
    • Like Like x 1
  4. Rob

    Rob Administrator Staff Member

    Joined:
    Aug 18, 2013
    Messages:
    18,341
    Likes Received:
    21,207
    Well, the Tiny and the regular NextGen are both built and are working flawlessly. I'm surprised, I had expected that the Tiny might be fiddly for my stupid fumbling hands and fingers, but it was fine.
    200SF with a 350 Topper works fine, but I feel the same as @dw1986 said, the 200 wicks damn fast..... possibly too fast? I'm going to rebuild tomorrow with 300 and a 400 Topper just to see.
    The NextGen has a 350 wick with a 400 Topper and is going Great Guns.

    Strangely, I'm not noticing a great difference between the 2 in terms of flavour. Both are loaded with HoL Minotor.

    Nice to be back doing this stuff again.;)
     
    • Like Like x 4
  5. dw1986

    dw1986 Achiever

    Joined:
    Jan 20, 2015
    Messages:
    3,489
    Likes Received:
    3,035
    200sf I have always found to be better for vaping mesh at higher wattage due to its rapid wicking, I like vaping my mesh builds in the 22-30w region and 200sf is ideal for this as it keeps up even with my chain vaping
     
  6. Rob

    Rob Administrator Staff Member

    Joined:
    Aug 18, 2013
    Messages:
    18,341
    Likes Received:
    21,207
    Arghhhhh. Of course!! I don't use my Gennys on Regulated, so that's why I am not really getting on with 200SF grade mesh !!
    I'll strip the Tiny down and see what happens when I replicate the build on the NextGen.:2thumbsup:
     
    • Like Like x 1
  7. domejunky

    domejunky Moderator Staff Member

    Joined:
    Nov 17, 2015
    Messages:
    2,369
    Likes Received:
    1,473
    Don't you find the Nextiny gets hot at higher wattages?
     
  8. Jugg1es

    Jugg1es Veteran

    Joined:
    Aug 13, 2014
    Messages:
    9,873
    Likes Received:
    4,957
    It will do, it's quite an exposed coil in a small area surrounded by metal. There's no wet cotton to help it cool down either
     
  9. paul-7

    paul-7 Achiever

    Joined:
    May 7, 2015
    Messages:
    4,550
    Likes Received:
    2,393
    second build in the Nextiny .... Mesh unknown , topper unknown , .28 Kanthal 0.8 ohms .... oh my .... what a great vape :2thumbsup: am I correct in thinking I can keep this build in for some time ? Dry burn and or ultrasonic cleaner ?
     
    • Like Like x 1
  10. Jugg1es

    Jugg1es Veteran

    Joined:
    Aug 13, 2014
    Messages:
    9,873
    Likes Received:
    4,957
    Yup, i rinse and dry burn then just brush the crap away
     
    • Like Like x 3
    • Thank Thank x 1

Share This Page