Sub-Ohm Warning!

Readers who are building very low ohm coils must be aware of the risks in regards to batteries and inhalation.
Please read THIS POST for more information.

POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!


X cube 2. Ohm jumping and 600f vaping

Discussion in 'Cloud Chasing & Sub Ohming' started by healeyelvisj, Nov 6, 2015.

  1. healeyelvisj

    healeyelvisj New Member

    Nov 6, 2015
    Likes Received:
    hi there I've recently started using the x cube 2 with ni200 coils. Resistance is set at 0.14 and coefficient rate at 0.00600, as I vape I notice the ohms changing. Wondering if it is supposed to do that and why if anyone knows? Also I'm finding I only enjoy it set at 600f ...I've noticed people using it a lot lower and when I've tried tit any lower than 550f I've pretty much got nothing out of it. Was wondering if I'm doing something wrong?
    Thanks in advance!
  2. Beastie

    Beastie Achiever

    Jun 26, 2014
    Likes Received:
    Welcome to the planet !@healeyelvisj Are you building your own coils or using stock coils and what tank? If building are you doing micro coils (I. E. Wraps touching) or spaced out wraps? Does the xcube prompt if it's a new coil when you first out the atty in? If you're needing to go that high and you're building your own it likely is a wicking issue. With tc you need bate minimum wick so that you get no resistance when pulling the wick through and the smallest wick tails you can get away with. If you're using stock coils then there maybe an unstable cool head.
    #2 Beastie, Nov 7, 2015
    Last edited: Nov 7, 2015

Share This Page