What gauge kanthol?

[marcus-mulisha]

I want to pick your brains over what gauge kanthol should I be using in my Stillare running on a Panzer? It obviously needs to be a dual coil build and able to chuck them clouds

 

[joe clay]

I'm no specialist on this but i think the most used kenthal seems to be .28 & .32 ....someone will be along to correct me if i'm wrong ;-)


Sent from a vape cloud using Planet of the Vapes

 

[RicModMaker]

28awg / 0.32mm does it for me. If you are mad and want to go super sub ohm, go thicker. I find 0.5ohm 8 wrap dual coil with 0.32mm kanthal works a treat.

 

[joe clay]

28awg / 0.32mm does it for me. If you are mad and want to go super sub ohm, go thicker. I find 0.5ohm 8 wrap dual coil with 0.32mm kanthal works a treat.

Seedy

I done a 2x coil 5 wraps on a single piece of 2mm voodoo wool earlier today and got .6 ohms... Is that good? It was just an idea i thought i'd try and it seems to have worked


Sent from a vape cloud using Planet of the Vapes

 

[RicModMaker]

Its good if it vapes well. Personally I wrap microcoils around a 2mm drill bit and use cotton.

 

[Diche]

Dual coiling on my tobh is a new game for me. I have 0.3mm and 0.5mm (not sure what the awg is for them) I find that neither is ideal for the coil range I am aiming for (0.8-1.0ohms) so I would suggest 0.36-0.4mm but obviously it depends on the ohms you are going to be aiming for

 

[Raguri]

Read my guide. Job done.

 

[bob]

I want to pick your brains over what gauge kanthol should I be using in my Stillare running on a Panzer? It obviously needs to be a dual coil build and able to chuck them clouds

i use 28 awg kanthal 8 wraps around a 2.5mm drillbit and it comes out at 0.8 ohm occasionally 0.7 ohm on a dual coil build
Coil wrapping | Steam Engine | free vaping calculators

 

[marcus-mulisha]

i use 28 awg kanthal 8 wraps around a 2.5mm drillbit and it comes out at 0.8 ohm occasionally 0.7 ohm on a dual coil build
Coil wrapping | Steam Engine | free vaping calculators

Cheers dude I'll order some 28 and see how I get on.

 

[Fleabag]

Depends on your target resistance. I don't sub-ohm, so have to return to the fiddly .2 kanthal for most dual coils, as there's not enough room in the kayfun or smaller drippers for the size of coils needed at .3mm (my target is 1.5-1.8 ohm)

Otherwise, really enjoying the relative ease of working with thicker kanthal

Sent from my GT-I9305 using Planet of the Vapes mobile app