Sub-Ohm Warning!

Readers who are building very low ohm coils must be aware of the risks in regards to batteries and inhalation.
Please read THIS POST for more information.

POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register
  1. The POTV Charity Fundraising Event for 2019 is go! Check out the prizes and make your donations here.
    Dismiss Notice

#teamsinglecoil

Discussion in 'Cloud Chasing & Sub Ohming' started by Raguri, Aug 8, 2014.

  1. Miss Pepper

    Miss Pepper Super Moderator Staff Member

    Joined:
    Nov 23, 2013
    Messages:
    16,275
    Likes Received:
    6,349

    Expected to see your clouds danny.... :D
     
  2. Diche

    Diche Veteran

    Joined:
    May 5, 2014
    Messages:
    6,190
    Likes Received:
    1,760
    Went with 0.5mm parallel 6 wraps on a 2mm drill bit and my MVP is just reading it as 0.0ohms :(
     
  3. Raguri

    Raguri Nutter!

    Joined:
    Mar 2, 2013
    Messages:
    8,323
    Likes Received:
    1,623
    I do, at 0.04... didn't do much if I'm honest. Tasted bloody awesome, but no woopah :(
    Morijas mix however.,. Ouch.
     
  4. Mr.Motivapr

    Mr.Motivapr Achiever

    Joined:
    Feb 5, 2014
    Messages:
    3,848
    Likes Received:
    917
    You have a short somewhere love.

    Have you checked to make sure the wires stayed side by side throughout the coil, i.e not crossed over

    Then make sure your screws are tight and the wire hasn't snapped in the posts.

    Failing that check there isn't any loose wire and the coil isn't touching the posts or the top cap.

    You will get there ;)
     
  5. robertgoldring

    robertgoldring Achiever

    Joined:
    May 28, 2014
    Messages:
    1,949
    Likes Received:
    349
    Out of curiosity. How low does the mvp2 fire. I've got a build I wanna try but it just keeps melting firing buttons and don't fancy risking it till I know,

    Thanx
     
  6. Diche

    Diche Veteran

    Joined:
    May 5, 2014
    Messages:
    6,190
    Likes Received:
    1,760
    yep checked all of that still can't figure it out, 0.5 is very different to work with from 0.3, I am not sure I am going to like the 0.7. Is it true that torching the wire before starting coiling can make it more pliable?

    Gonna put a dual coil build back in for now, I need it functional for the morning, but going to use the off cuts of 0.5mm and see what happens :D
     
  7. Huggett

    Huggett Legend

    Joined:
    Feb 25, 2014
    Messages:
    14,198
    Likes Received:
    8,299
    Its supposedly meant to be 1.2-1.4 so I heard with a max of 3amps but people have fired down to 0.8 :-/

    The battery has a limit of 3amps

    Sent from my GT-I9300 using Planet of the Vapes mobile app
     
  8. robertgoldring

    robertgoldring Achiever

    Joined:
    May 28, 2014
    Messages:
    1,949
    Likes Received:
    349
    Ahh. Best not try it then. Thanx
     
  9. Huggett

    Huggett Legend

    Joined:
    Feb 25, 2014
    Messages:
    14,198
    Likes Received:
    8,299
    No problem pal

    Not sure what batteries in them but if its 3.7V and 3amps then 1.2 is the 'max' it can go

    Sent from my GT-I9300 using Planet of the Vapes mobile app
     
  10. robertgoldring

    robertgoldring Achiever

    Joined:
    May 28, 2014
    Messages:
    1,949
    Likes Received:
    349
    Not worth the risk to b honest. Can't afford to replace it right now, will sace up and get a mech clone. Will the k100 fire reasonably low. I'm not talking Raguri low. Just lower than the 0.7 I can do on the vtr.
     

Share This Page