So I decided to build a box mod test rig.

[gords1001]

I'd just like to say that I don't really class myself as a cloud chaser.

It just so happens I like open airflow, a warm vape and dont get on with pg.

I really fancy a brass and wood box mod, I do though believe that we are already way beyond the capabilities of round li ion cells, a much better power source is necessary. Fortunately I believe I have such a power source to hand.

So I got together some materials and cracked on with it.











I had a little lack of resistor issue, but fumbled through that and got it going.



Testing proved interesting. Though the cells will take builds down to .2ohm, ordinary 4.2v builds just blow. They cannot take what is available.

However I did get a build going after a couple of false starts.

[video]http://m.youtube.com/watch?v=P1UoZHUfWeo#[/video]

[video]http://m.youtube.com/watch?v=V1tmvq57iuI#[/video]

I give this some thought. Then decided it worked so well, it might like a friend in that 22mm atty.



Yes. I've not even got to sub ohm yet.

It seems to do the trick though.

[video]http://m.youtube.com/watch?v=4SKnkAPG-fs#[/video]

[video]http://m.youtube.com/watch?v=-Dbl_IuShLQ#[/video]

At this point I invite you to go to your ohms law calculator and input 12.6v and .25ohm.

Yep thats about what's available in this little enclosure. Eliquid seems to ignite around the 500watt mark. I'm hoping a 30mm atty will help with that but I doubt it

Thanks for reading. These are my thoughts so far, I invite your own.

 

[Raguri]

I think I need one of these... for... sciencey testing...

Yes.
For science...

 

[gords1001]

I think you do too. Crack on with it then!

You'll definitely appreciate it, its effortless power, my mechs feel flat now

 

[gords1001]

One suggestion though. It needs to be a squonker. And we need an atty that can take a competition cap and be bottom fed.

 

[Chegs]

One suggestion though. It needs to be a squonker. And we need an atty that can take a competition cap and be bottom fed.

The Zenith apparently can be converted to squonking, think it's schmo Vapes does a centre pin for them. The best part about jumping up in volts is each doubling halves the drawn current so no big losses, though how the hell you're not boiling your tonsils at 12V+0.2 ohms is beyond me. I had my juice burst into flames whilst I was taking a toke and that was just 8.4V(had mixed up my attys and accidently screwed the 0.2 ohm build onto the 8.4V box)That scared the bejeezus out of me and made me double check BEFORE attaching any of my attys.

 

[gords1001]

I'm still at 1.4ohm...... I'm not completely stupid

 

[gords1001]

Ok, ive been using it all last night and all today. Its still running over 100watts.

It started at 12.58v, its now down to 11.98v.


A night and a day vaping over 100watts and I've used .6v. I love high voltage vaping.

Raguri you need one of these

 

[Raguri]

Ok, ive been using it all last night and all today. Its still running over 100watts.

It started at 12.58v, its now down to 11.98v.


A night and a day vaping over 100watts and I've used .6v. I love high voltage vaping.

Raguri you need one of these

I do... HahaHa. But, you know me well enough to know what would happen
Also your red cross parcel arrived, loving the Samsung's!

 

[gords1001]

Not bad are they? Be mindfull they are only 1500mah. Still hit well though

 

[gords1001]

Just recharged the first lipo pack



So across the top we have time taken to charge and capacity added underneath is termination voltage.

1800mah for two days 100watt vaping.

I think that's fucking awesome tbh.

I've just been weighing up my smaller packs and a 100watt gripper style squonker looks entirely feasible as a gentle mans out and about mod