Sub-Ohm Warning!

Readers who are building very low ohm coils must be aware of the risks in regards to batteries and inhalation.
Please read THIS POST for more information.

POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register

single coil build in a goon

Discussion in 'Cloud Chasing & Sub Ohming' started by kamido, Aug 2, 2017.

  1. kamido

    kamido Achiever

    Joined:
    Jun 15, 2016
    Messages:
    3,253
    Likes Received:
    3,632
    @cptfrederickson normaly use ni80 flat wire duel coil 6 wraps comes out around .2 or paralel ni80 think thats 7wraps comes out at about .17 cant remember the wire gauge without looking i have to right stuff down so i dont for get it :D that for my regulated builds iv got plenty of kantal ni80 and one roll of ss i was given may have to buy a roll of that and give it ago one thing i never bought was rolls of the clapton type wires
     
  2. cptfrederickson

    cptfrederickson Postman

    Joined:
    Jun 1, 2016
    Messages:
    842
    Likes Received:
    529
    I generally use kanthal claptons but fancied a change. Not sure if they make much difference but I've got quite a variety now. The SS 316L is also very good, curious to try some flattened SS
     
  3. kamido

    kamido Achiever

    Joined:
    Jun 15, 2016
    Messages:
    3,253
    Likes Received:
    3,632
    @cptfrederickson iv order some of that stuff plus some other diffrent wire bit of a mix and match :2thumbsup:
     
    • Like Like x 1
  4. kamido

    kamido Achiever

    Joined:
    Jun 15, 2016
    Messages:
    3,253
    Likes Received:
    3,632
    @cptfrederickson mornin old boy just a quick one that wire more than likely will be here to day what awg is it for ehen i use steam engie know its ni80 but cant work out the gauge of it
     
  5. cptfrederickson

    cptfrederickson Postman

    Joined:
    Jun 1, 2016
    Messages:
    842
    Likes Received:
    529
    I think because it's flattened you put in that info, 0.3x0.8 if I recall.
     
  6. cptfrederickson

    cptfrederickson Postman

    Joined:
    Jun 1, 2016
    Messages:
    842
    Likes Received:
    529
    IMG_2320.PNG
    This is what I get from steam engine and was pretty accurate. Selected Clapton from the menu (off screen) and changed to ribbon for core with measurements written on reel. 6 wrap, 3mm diameter.
     
    • Thank Thank x 1
  7. syrus

    syrus New Member

    Joined:
    Jun 8, 2017
    Messages:
    4
    Likes Received:
    0
    I use single builds in my Goon and Goon LP , perfect every time , even at 35 watts (0.5) build
     
  8. syrus

    syrus New Member

    Joined:
    Jun 8, 2017
    Messages:
    4
    Likes Received:
    0
    Ni80 from Geekvape , works perfectly as a single on the Goon v1.5

    6 wraps , id 3mm once wicked its showing 0.26 and am vaping it at 40 w


    20171021_115913[1].jpg
     
  9. burnt fingers

    burnt fingers Achiever

    Joined:
    Jul 16, 2017
    Messages:
    2,241
    Likes Received:
    1,745
    I was thinking of going to a single flat wire in my goon, as dual flats is drinking juice at a rate where the constant dripping is inconvenient.
     

Share This Page