What's new

I Demand Coil Porn!!!

Example: assuming, 3mm diameter and 1.5mm twist to the nichrome wires

the twisted 0.27 nichrome 6 wraps = 0.8 Ohms
the parallel 0.35 kanthal 7wraps = 0.65 Ohms
= 1.45 Ohms / 2 = 0.725 Ohms in total

The gauge of the wire, not the resistance. Its another way of saying the thickness. Wire comes in 20 gauge (thickest) to 22, 24, 26, and 28 gauge (thinnest) generally.

Is wire just told in terms of mm in the uk??

Sent from my Prism II using Planet of the Vapes mobile app
 
The gauge of the wire, not the resistance. Its another way of saying the thickness. Wire comes in 20 gauge (thickest) to 22, 24, 26, and 28 gauge (thinnest) generally.

Is wire just told in terms of mm in the uk??

Sent from my Prism II using Planet of the Vapes mobile app

I know what gauge means lol i just missed what you were actually asking and when off on a tangent lol

yep, mm or SWG here

the AWG/mm equivalents are
AWG = mm
20 = 0.812
22 = 0.644
24 = 0.511
26 = 0.405
28 = 0.321
30 = 0.255
 
I know what gauge means lol i just missed what you were actually asking and when off on a tangent lol

yep, mm or SWG here

the AWG/mm equivalents are
AWG = mm
20 = 0.812
22 = 0.644
24 = 0.511
26 = 0.405
28 = 0.321
30 = 0.255

Why thank you o_O I shall make a note of this to better communicate with the friendly folks on this forum

Sent from my Prism II using Planet of the Vapes mobile app
 
I know what gauge means lol i just missed what you were actually asking and when off on a tangent lol

yep, mm or SWG here

the AWG/mm equivalents are
AWG = mm
20 = 0.812
22 = 0.644
24 = 0.511
26 = 0.405
28 = 0.321
30 = 0.255
Wait, ive heard it before but what is swg?? Haha


Sent from my Prism II using Planet of the Vapes mobile app
 
This is actually a 1.2 ohm build. Stupid vv/vw can't sub ohm. Frustrating but I am going to get me a cloupor t5 soon

Sent from my SM-N900V using Planet of the Vapes mobile app
 

Attachments

  • 1409772081121.jpg
    1409772081121.jpg
    28.1 KB · Views: 519
Nothing special from me today, just tinkering with the new gauges of wire I got today. Was planning on doing a parallel 22 & 26awg build but my post holes are too small :(

9 wraps of 22awg will have to do untill I get my Zenith

g2fhxRP.jpg
 
This is actually a 1.2 ohm build. Stupid vv/vw can't sub ohm. Frustrating but I am going to get me a cloupor t5 soon

Sent from my SM-N900V using Planet of the Vapes mobile app

Hey, I don't even know how to build anything that ISNT sub ohm, so I can't even build. My most recent build may have caused permanent damage to my ecig.. Too much heat firing through the mod fucked my spring and now my firing button heats up enough to actually burn my finger no matter what build i put on it.

Sent from my Prism II using Planet of the Vapes mobile app
 
Back
Top Bottom