Sub-Ohm Warning!

Readers who are building very low ohm coils must be aware of the risks in regards to batteries and inhalation.
Please read THIS POST for more information.

POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register
  1. The POTV Charity Fundraising Event for 2019 is go! Check out the prizes and make your donations here.
    Dismiss Notice

Coil advise needed

Discussion in 'Cloud Chasing & Sub Ohming' started by dale79, Feb 25, 2019.

  1. dale79

    dale79 Postman

    Joined:
    Aug 22, 2015
    Messages:
    119
    Likes Received:
    43
    Hello, after some advise on a set of coils that were given to me, he cannot remember the wire gauge or where it came from! They are absolutely perfect in my squonk mech & produce great flavor/vapour & really good battery life as they ramp up mega fast, I'm guessing it's around 22g flat clapton wire (ni80 possibly? although very fine) it's very stiff & comes with 3 wraps & 3mm ID and ohm's out at .12-.13 here is a picture:

    20190225_115359.jpg

    Many thanks for any advice
     
  2. Badboybez

    Badboybez Achiever

    Joined:
    Apr 12, 2017
    Messages:
    3,396
    Likes Received:
    1,302
  3. StrawberryRipple

    StrawberryRipple Veteran

    Joined:
    Jun 2, 2017
    Messages:
    7,474
    Likes Received:
    4,032
    Best thing i can suggest is when you're ready to replace them is to take the outer wrap off to see whats underneath.
    Theres going to be quite a lot of wire mass under there and look like multi strand maybe 5 or 6 cores.
     

Share This Page