Sub-Ohm Warning!

Readers who are building very low ohm coils must be aware of the risks in regards to batteries and inhalation.
Please read THIS POST for more information.

POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register

32awg / 0.20mm kanthal on dripper ?

Discussion in 'Cloud Chasing & Sub Ohming' started by vespa, Feb 16, 2015.

  1. vespa

    vespa Postman

    Joined:
    Dec 7, 2013
    Messages:
    138
    Likes Received:
    14
    hi all, i got some free 32awg / 0.20mm kanthal and wanting to use it on my plume veil, any special builds to go for ?
    im running 28awg at 0.5 ohms and love it, just dont want to waste a freebie...

    cheers :)
     
  2. steamtrain

    steamtrain Postman

    Joined:
    Jan 17, 2015
    Messages:
    222
    Likes Received:
    34
    Id twist about 5 pieces to gether then you can still higher the resistance or do some parrallel with 3 wires instead of two :-)
     
  3. EmbraSewerRat

    EmbraSewerRat Veteran

    Joined:
    Aug 29, 2014
    Messages:
    5,141
    Likes Received:
    3,483
    As suggested, get 3 lengths, about 20cm and twist it in a drill or by hand. Use the result in either a dual or single coil. Do check resulting coils in a good ohm reader afore you fire it up tho'!

    Or save the teensy wire until you start making Claptons.
     

Share This Page