Sub-Ohm Warning!

Readers who are building very low ohm coils must be aware of the risks in regards to batteries and inhalation.
Please read THIS POST for more information.

POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register
  1. The POTV Charity Fundraising Event for 2019 is go! Check out the prizes and make your donations here.
    Dismiss Notice

21 awg ni80 flat wire

Discussion in 'Cloud Chasing & Sub Ohming' started by leeo666, Jun 1, 2017.

  1. leeo666

    leeo666 Postman

    Joined:
    Jan 12, 2016
    Messages:
    735
    Likes Received:
    625
    Hi all just a quick question purchased this without doing some proper research into wire gauge never used ni80 before heard it's quick ramp up and the flavour is really good but will be using it on a mech but just can't seem to get the build right I'm aiming for .2 but it's come out either to high 0.3and above or 0.07 which is far to low i.e. Like my face and hands how they are anyway any idea as to how many wraps I should be aiming for duel coil thanks in advance
     
  2. Michael jackson

    Michael jackson Achiever

    Joined:
    Jan 6, 2017
    Messages:
    4,288
    Likes Received:
    2,994
    Depends on the dimension of the flat wire but if it's 0.91 x 0.45 6x 3mm wraps single coil
    ImageUploadedByPlanet of the Vapes Forum1496342238.839118.jpg
     
  3. Michael jackson

    Michael jackson Achiever

    Joined:
    Jan 6, 2017
    Messages:
    4,288
    Likes Received:
    2,994
    Or 12 duel coil
    ImageUploadedByPlanet of the Vapes Forum1496342305.089978.jpg
     
  4. leeo666

    leeo666 Postman

    Joined:
    Jan 12, 2016
    Messages:
    735
    Likes Received:
    625
    That's the one mate think I mite have a dodgy connection some where because I've got a duel coil 12 wraps each on a goon clone put it on the wismec 300 and says to low but it on my tab and it says 0.08 looks like I'll have to strip it down and start again thanks for the info
     
  5. Michael jackson

    Michael jackson Achiever

    Joined:
    Jan 6, 2017
    Messages:
    4,288
    Likes Received:
    2,994
    Anytime hope you sort it. Try tightening the post screws
     
  6. Michael jackson

    Michael jackson Achiever

    Joined:
    Jan 6, 2017
    Messages:
    4,288
    Likes Received:
    2,994
    And make sure the coil isn't touching the posts. Post a pic if you want
     
  7. leeo666

    leeo666 Postman

    Joined:
    Jan 12, 2016
    Messages:
    735
    Likes Received:
    625
  8. mattyk2010

    mattyk2010 Veteran

    Joined:
    Aug 6, 2016
    Messages:
    7,459
    Likes Received:
    7,389
    Is it UK flatwire by any chance?

    If it is I had a spool for my mech and it always seemed to come out crazy low or shit ramp up with giant coils so I switched to 22g SS from them and its so much better to build with and better flavour
     
  9. leeo666

    leeo666 Postman

    Joined:
    Jan 12, 2016
    Messages:
    735
    Likes Received:
    625
  10. leeo666

    leeo666 Postman

    Joined:
    Jan 12, 2016
    Messages:
    735
    Likes Received:
    625
    It's from these ImageUploadedByPlanet of the Vapes Forum1496344380.050956.jpg
     

Share This Page