Worlds First SX350 Box Mod

[jimthecarper]

After testing for a couple of weeks I've now built the first of the SX350 Box Mods.

The 30 to 35 watt software upgrade will be available to download from the 1st of May.

SX350 Chipset - 5-35 watt Variable Power Device (step up/step down) with 15mm x 12mm OLED screen.
Atomiser resistance from 0.2ohms to 3ohms.
Powder Coated Aluminium Enclosure.
35000mAh Lithium Ion battery 30amp max discharge rate.
Self adjusting 510 connector with Beryllium Copper internal contact and Brass Floating positive pin.
Stainless Steel switch with flush operation button for safety.
Micro USB charging port with LED indication at 1amp.

SX350 Chipset Specification.
Specifications
Second generation Dual Layer microprocessor.
Variable Selective Power. 5watts - 35watts in 0.1 watt steps
Voltage 1.5volts-9.5volts.
0.2 - 3.0 ohm Atomizer. Resistance.
Voltage can be Increased or Decreased.
By-pass mode (Automatic setting by sensing the atomisers resistance)
Single button operation to open menu.
Switching by gravity sensing switch when menu selected. (Simply turn left or turn right. Not shake)
15mm x 12mm OLED viewing window.
Software upgradable through Micro USB connector.

 

[sparkyjuice]

Looking good !


Sent from (who cares) using Planet of the Vapes

 

[Chegs]

Nice work,nice VV/VW board from those specs...I might decide to build one myself now.

 

[T wisted]

Quite a few about now

 

[Phantom Diablo]

very nice.. now where can i buy one! money in my paypal is getting restless!!!

 

[EthelKing]

VERY nice work!

 

[bish]

iv got a few chips on there way to me as well whoop

 

[skanska]

Refreshing change from the dna30 only well done.

 

[sampit]

Very easy chip to build in to a mod,with very little wiring needed.
looks great.
I ended up getting 6 of the latest SX300 chips the day they arrived, they launched the SX350
pissed me right off. would have waited a few extra days if they had told me about the SX350
had no problems with the SX300 works a treat.

 

[jimthecarper]

That's a bummer, the 350 is a world away from the 300 and looks like it will be supported by the factory with a number of updates through the GUI.
35 watt upgrade should be available to download on the 1st may.