What Wires?

[RicModMaker]

Any electronics wizards out there? Namely @sparkyjuice
If a person was to get their hands on a board that could handle passing 200w & 25a max through it, what size wires would you think should be on that board that could handle bursts of that sort of current?

And if such a board did exist, as a modder, would you prefer solder holes on the board so you could use your own wires or wires already soldered?

Thanks for your help.

 

[simonsays]

Solid copper bus bars

 

[RicModMaker]

Solid copper bus bars

Yeah yeah. I'm going for 14AWG 2mm.

 

[fasteddie600]

Yeah yeah. I'm going for 14AWG 2mm.

Yep the 2.5mm 14AWG wire will do the trick seedy.

You should be able get away with 1.5mm if your runs are short.



So..Spill the beans, what is this mysterious board you have your hands on?

 

[RicModMaker]

Yep the 2.5mm 14AWG wire will do the trick seedy.

You should be able get away with 1.5mm if your runs are short.



So..Spill the beans, what is this mysterious board you have your hands on?

Patience my dear Eddie. If I told you I'd have to kill you ;-)

 

[robertgoldring]

Patience my dear Eddie. If I told you I'd have to kill you ;-)

Or get him one, and that's the real reason you won't say,

 

[RicModMaker]

Its too soon. The beans aren't cooked yet ;-)