What's new
  • Due to active development, we've had to change the site cookie domain. If you're having any issues logging in, please try clearing your cookies for forum.planetofthevapes.co.uk and try again. Sorry for any inconvenience. The POTV Team

The Lost Mods

Loco

Postman
Joined
May 16, 2014
Messages
843
Hi people, for a long time I suffered from the inability to be happy with my own work, I was excessively critical. Nothing was ever good enough. Unfortunately this deprived me from the feeling of pride you should feel when accomplishing something, and I never shared what I made.

This attitude brought me no joy, and I'm working on it.

Sooooo, I thought now may be a good time to share some pictures of a few of my past creations. (There were many more!)

I am working on some new pieces, so if there is any interest after this post, I'll be sure to pop the progress of those up here too.


First up, a switchfet brass tubed squonker made from maple burl.

20170702_171749.jpg
20170702_172203.jpg
 

Attachments

  • 20170702_172212.jpg
    20170702_172212.jpg
    2.3 MB · Views: 110
  • 20170702_172256_HDR.jpg
    20170702_172256_HDR.jpg
    2.2 MB · Views: 112
  • 20170707_131811_HDR.jpg
    20170707_131811_HDR.jpg
    1.6 MB · Views: 111
  • 20170707_131854.jpg
    20170707_131854.jpg
    1.4 MB · Views: 108
Last edited:
number 2 - my first attempt at making my own stabwood block, I wanted a side by side mod so made this. Uses a 18650 and yihi sx350 board.
 

Attachments

  • 20170401_132859.jpg
    20170401_132859.jpg
    3.4 MB · Views: 112
  • 20170401_132906.jpg
    20170401_132906.jpg
    4 MB · Views: 115
  • 20170401_132926.jpg
    20170401_132926.jpg
    4.4 MB · Views: 116
  • 20170401_133125.jpg
    20170401_133125.jpg
    2 MB · Views: 117
  • 20170401_173646_HDR.jpg
    20170401_173646_HDR.jpg
    2.6 MB · Views: 113
Last edited:
The over engineered squonker. Seems a fair few pics are too large to upload, but there is 10000% more than I've uploaded in the past, so its a start!

This one took a fair bit of time to make, the squonk bottle slides into the rear tube, then would slide on the rails to attach to main body and lock in place with magnets, connecting the bottle to the squonk pin/510 in the process.
It required some pretty fine tolerances but it achieved what I wanted from it, easy refil and reload.
The 18650 would fit into the cavity of the mod exposed when you removed the bottle section.
 

Attachments

  • 20170919_220342.jpg
    20170919_220342.jpg
    2.2 MB · Views: 113
  • 20170920_222404.jpg
    20170920_222404.jpg
    2 MB · Views: 111
  • 20180111_233159.jpg
    20180111_233159.jpg
    2.3 MB · Views: 112
  • 20180111_233354.jpg
    20180111_233354.jpg
    2.1 MB · Views: 111
  • 20180313_104844.jpg
    20180313_104844.jpg
    1 MB · Views: 111
  • 20180313_104904.jpg
    20180313_104904.jpg
    1 MB · Views: 110
  • 20180313_104928.jpg
    20180313_104928.jpg
    1.1 MB · Views: 110
  • 20180314_162008.jpg
    20180314_162008.jpg
    1.5 MB · Views: 113
  • 20180323_122101.jpg
    20180323_122101.jpg
    2.5 MB · Views: 115
  • cropped.jpg
    cropped.jpg
    1.2 MB · Views: 108
Last edited:
Some gorgeous pieces there, @Loco. I particularly like nos 1 & 2, nice designs and some great craftsmanship there [emoji1303]
 
You should be very happy with them, personally I like number 1 the best, but they do both look great, keep up the good work....
 
We are a hard bunch to impress mate but they are beautiful mods you've made there so pat yourself on the back and try not be critical of yourself cos you done good, any more you've made id love to see :2thumbsup:
 
Definitely share some more @Loco . You are clearly very creative and competent. Some lovely work there.
 
Back
Top Bottom