POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register

presenting "Passion" a regulated dna75c squonker stabwood hybrid

Discussion in 'All Things Mod Making' started by vapesmarter, Apr 6, 2019.

  1. vapesmarter

    vapesmarter Case Maker

    Joined:
    Jun 12, 2016
    Messages:
    2,885
    Likes Received:
    9,010
    I've done these before but I'm doing this one different its a right-hand format

    DVD

    "Marathon Man"

    Janeway: Listen, why don't we begin with what happened tonight, hmm? Perhaps you could... you know, give me some of the details.
    Babe: I was here, Doc... died, you came.
    Janeway: That's it?
    Babe: I'm a demon for details.


    so here is the block cut to the shape I have no idea what it will look like until I finish it for an approval shot the world holds its breath for a yes or no answer

    alfIMG_7992.jpg


    ok its semi polished I can see it in my hand but the customer (who is a lurker on here and my hopes he will join POTV) cant see what I can

    alfIMG_7997.jpg
    faceplate cutting all done by hand

    alfIMG_8115.jpg
    so with block cut and plate done, add the bits and we have

    alfIMG_8135.jpg
    Passion

    alfIMG_8136.jpg

    its made for a right-handed vaper

    alfIMG_8137.jpg
    the DNA board is a 75c

    alfIMG_8138.jpg alfIMG_8139.jpg

    my hands were dusty so the mod was dusty also the dust comes free with the mod.......

    in the paw 360 degree



    next time

    a twin set

    deep

    shimmer

    flux

    amber

    love my mods then like them buy one
     
    • Like Like x 15
  2. kockeyedkitty

    kockeyedkitty Achiever

    Joined:
    Mar 8, 2016
    Messages:
    1,558
    Likes Received:
    1,867
    Oh I love the fire tones in this one!! She's hot! Love black and red together very seductive!
     
    • Like Like x 2
  3. John R

    John R Achiever

    Joined:
    Mar 18, 2018
    Messages:
    4,229
    Likes Received:
    3,312
    Very very nice, exactly how I pictured the panels looking for my paranormal that you never made me :P
     
    • Like Like x 1
  4. skinku

    skinku Achiever

    Joined:
    Feb 23, 2015
    Messages:
    2,362
    Likes Received:
    1,678
    I have always meant to ask why do you not use Allen screws?
    Posidrive look terrible...
    Really love your mods though, just asking?
     
    • Like Like x 1
  5. rew

    rew Achiever

    Joined:
    May 18, 2016
    Messages:
    4,385
    Likes Received:
    5,304
    Love the colour combo and depth in this one
     
    • Like Like x 2
  6. vapesmarter

    vapesmarter Case Maker

    Joined:
    Jun 12, 2016
    Messages:
    2,885
    Likes Received:
    9,010
    Ahhh the screw debate a lot of people hate screws they want screwless faceplates, there is a but here, a big but, I want my mods to be able to be serviceable, boards fail 510s break if you don't use screws you have to bond the face plate on as in glue it in place once glued if the board fails you will have to break into the mod so 90% of the time the mod is scrap

    case in point 2 years ago I did a dna75 the boards temp controller failed in the first 12 months after 24k puffs he had a new board FOC 8 months later it went again he had another board FOC just before Xmas he sent me the mod and asked for a yihi 485j board to be fitted which I did for him the mod is still going strong, if I had of glued that plate in place the mod would be scrap

    Your quite right I should use torq or Allen but the screws are m1.6 very small so getting good quality small screws is hard to date I haven't found any I'm still looking

    I know people mark down a mod with a screwed plate in place but its better than throwing it in the bin.

    however, my e-pipes don't use screws at all

    but also there is a cost element a mod thats screwless is more expensive, producing a mod that is £60 £100 cheaper than other mods out there reflects in that price
     
    • Like Like x 5
    • Thank Thank x 1
  7. BULLDOG1964

    BULLDOG1964 Veteran

    Joined:
    Aug 8, 2017
    Messages:
    8,188
    Likes Received:
    4,677
    Another cracking squonk there Stu love the colours in this one and that groove you have down the side gives it a nice finishing touch ........:2thumbsup:.........
     
    • Like Like x 2
  8. Deaf Vaper

    Deaf Vaper Achiever

    Joined:
    Mar 1, 2018
    Messages:
    3,516
    Likes Received:
    3,196
    Wow! Liking the colours on that one.

    A lot of squonkers about aren't there!
     
    • Like Like x 2
  9. Banjostring

    Banjostring Achiever

    Joined:
    Dec 16, 2017
    Messages:
    1,602
    Likes Received:
    1,643
    Beautiful colour scheme on this one, just gorgeous
     
    • Like Like x 2
  10. Sam's Vape Reviews

    Sam's Vape Reviews Achiever

    Joined:
    Mar 10, 2017
    Messages:
    4,224
    Likes Received:
    4,299
    Looks good as always Stu
     
    • Like Like x 2

Share This Page