POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register
  1. The POTV Charity Fundraising Event for 2019 is go! Check out the prizes and make your donations here.
    Dismiss Notice

Mod Wiring Diagrams

Discussion in 'All Things Mod Making' started by Seedy, May 21, 2015.

  1. joe clay

    joe clay Veteran

    Joined:
    Apr 19, 2014
    Messages:
    9,823
    Likes Received:
    10,420
    If there is i won't know what ones they are
     
  2. joe clay

    joe clay Veteran

    Joined:
    Apr 19, 2014
    Messages:
    9,823
    Likes Received:
    10,420
    I'll get a photo of it later and post it on here mate.
     
  3. Seedy

    Seedy Vendor

    Joined:
    Oct 29, 2013
    Messages:
    3,271
    Likes Received:
    627
    I'd very much doubt there are. Your only option is probably to take the switches apart or off if you want to move the switches
     
  4. joe clay

    joe clay Veteran

    Joined:
    Apr 19, 2014
    Messages:
    9,823
    Likes Received:
    10,420
    Its not much to go by,
    ImageUploadedByPlanet of the Vapes1459293522.799532.jpg
    ImageUploadedByPlanet of the Vapes1459293536.798304.jpg
     
  5. Seedy

    Seedy Vendor

    Joined:
    Oct 29, 2013
    Messages:
    3,271
    Likes Received:
    627
    I see the legs are exposed on those switches. You could solder wires to those legs
     
    • Like Like x 1
  6. joe clay

    joe clay Veteran

    Joined:
    Apr 19, 2014
    Messages:
    9,823
    Likes Received:
    10,420
    Cheers @Seedy thats exactly what i've done... I had a hana mod with authentic DNA30 chip that i got from @city461 but it stopped working and noticed the board was getting quite hot, so i ripped it out and as i love the look & feel of the hana mod (this ones in blue and like new) i had a spare ipv D2 TC mod,so i took the guts out then soldered on new switches etc, so i can fit it into the hana mod...... Should finish it in next day or so..... Cheers for your help bud.
     
  7. Seedy

    Seedy Vendor

    Joined:
    Oct 29, 2013
    Messages:
    3,271
    Likes Received:
    627
    You're very welcome. Post lots of piccies ;-)
     
  8. joe clay

    joe clay Veteran

    Joined:
    Apr 19, 2014
    Messages:
    9,823
    Likes Received:
    10,420
  9. Mac82

    Mac82 Initiate

    Joined:
    Jan 5, 2017
    Messages:
    17
    Likes Received:
    8
    Greetings y'all
    New builder her working on a box mod
    What I really need help with on this project is.
    I'm building a box all from scratch now I'm no stranger to building my own electronics but could use some assistance in finding a proper wiring diagram. I'm working on a MOSFET build but I'd like to incorporate a trim diel to moderate my amps. Now do I need to use a 555 timer or if I can just run it inline from the MOSFET to the 510 if I have to build the own with the 555 then I can do that too I just wanted some additional advice. Now if anyone can point me in the right direction that would be great.
     
  10. Seedy

    Seedy Vendor

    Joined:
    Oct 29, 2013
    Messages:
    3,271
    Likes Received:
    627
    • Like Like x 2

Share This Page