doobedoobedo
Postman
- Joined
- Nov 30, 2013
- Messages
- 179
Made of mahogany and teak.
5400 mAh 7 LiPo cells in parallel. Rated continuous current 189A rated burst current 378A if you believe the battery manufacturer. 0.07V drop with a 0.2 ohm coil.
It all started with some of these. 18650 is for size comparison.
They turned into this little power pack
So I cut some boards and started making plans
Custom copper centre pin made from a rivet and shoulder washer to go in a cheap 510
done
The box starts to take shape
Test fitting commences - those fuses :/
USB charge point
Final size other mods for scale and yes that's my trusty Vamo
Done. The fuses had to go they were just too big. Best not short it...
Top left is the master on/off switch and top right is a fast charge port for plugging in a proper LiPo charger.
Not the most petite mod ever made
The voltage drop with 2x1 ohm coils, gotta love parallel cells.
5400 mAh 7 LiPo cells in parallel. Rated continuous current 189A rated burst current 378A if you believe the battery manufacturer. 0.07V drop with a 0.2 ohm coil.
It all started with some of these. 18650 is for size comparison.
They turned into this little power pack
So I cut some boards and started making plans
Custom copper centre pin made from a rivet and shoulder washer to go in a cheap 510
done
The box starts to take shape
Test fitting commences - those fuses :/
USB charge point
Final size other mods for scale and yes that's my trusty Vamo
Done. The fuses had to go they were just too big. Best not short it...
Top left is the master on/off switch and top right is a fast charge port for plugging in a proper LiPo charger.
Not the most petite mod ever made
The voltage drop with 2x1 ohm coils, gotta love parallel cells.
Last edited by a moderator: